Cat Marine Hempel

Hempadur ( CAT EPOXY)

Hempadur Primer 15300
(mengandung zinc phosphate cat anti karat, umum digunakan untuk melindungi berbagai macam besi, cocok untuk cat container)

Hempadur 15400
( cat hempel ini anti/anti kimia dan ramah lingkungan, cocok untuk internal tank, cargo kapal aman untuk makanan dan lain lain)

Hempadur 15460
(cat ini tahan kimia berbagai macam jenis terutama minyak atau petroleum, baik itu CPP- clean petroleum product, maupun DPP – dirty Petroleum Product,  biasa digunakan sebagai lining Tanki / kilang, brine, drilling mud, fish (RSW), kulkas ikan, tanki air, tanki solar dan lain sebgainya)

Hempadur 15500
(Cat ini biasa digunakan pada ruang kargo internal kapal, bagian dalam kilang minyak and kargo atau tanki kereta, tahan kimia)

Hempadur 15553
(primer untuk material yang di hot galvanis, alumunium dan stainless steel, untuk lingkungan korosif medium hingga sangat korosif)

Hempadur 15570
(Hempadur 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at temperatures down to -10°C/14°F. The Micaceous Iron Oxide pigmented light grey 12430 quality is also well suited for application under humid conditions, on dam)

Hempadur 15590
(a two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion)

Hempadur 15600
(Pure epoxy, high solids dries and cures fast, and has high chemical and heat resistance. It offers reliable all year round application from -5 °C upwards and an easy to clean hard, glossy surface. Suitable for new builds and maintenance, Hempadur 15600 is VOC compliant below the 250-grams/litre limit, and conforms to IMO/PSPC rules for ballast tanks (WBT) and cargo oil tanks (COT))

Hempadur Zinc 17360
(A two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-resistant coating. Offers cathodic protection of local mechanical damage)

Hempadur 17630
(is a two-component, high-build, polyamide adduct-cured epoxy paint which cures to a hard and tough coating with good resistance to abrasion, seawater and crude oils)

Hempadur 17633
(is a two-component, high-build, polyamide adduct-cured epoxy paint which cures to a hard and tough coating with good resistance to abrasion, seawater and crude oils)

Hempadur Quattro XO 17720
(A PSPC qualified, two-component, pure epoxy universal primer with excellent abrasion resistant and anticorrosive properties. The product can be reinforced with Hempel patent fibre technology to deliver tailor made optimised performance properties for different harsh service conditions)

Hempadur Quattro XO 17760
(A PSPC qualified, two-component, pure epoxy universal primer with extended overcoat interval, excellent abrasion resistant and anticorrosive properties. The product can be reinforced with Hempel patent fibre technology to deliver tailor made optimised performance properties for different harsh service conditions)

Hempadur Quattro XO 17770
(A PSPC qualified, two-component, pure epoxy universal primer with extended overcoat interval, excellent abrasion resistant and anticorrosive properties. The product can be reinforced with Hempel patent fibre technology to deliver tailor made optimised performance properties for different harsh service conditions)

Hempadur Quattro XO 17820
(A PSPC qualified, two-component, pure epoxy universal primer with 80% solid volume, excellent abrasion resistance and anticorrosive properties. The product can be reinforced with Hempel’s patented fiber technology to deliver tailor made optimised performance properties for different harsh service conditions)

Hempadur Quattro XO 17870
(A PSPC qualified, two-component, pure epoxy universal primer with 80% solid volume, extended overcoat interval, excellent abrasion resistant and anticorrosive properties. The product can be reinforced with Hempel patent fibre technology to deliver tailor made optimised performance properties for different harsh service conditions)

Hempadur Spray-Guard 35490
(is a solvent-free, two-component, epoxy coating. It cures to a hard, tough and well adhering protective coating. It can be spray applied in one coat at a minimum film thickness of 2.5 mm (100 mils))

Hempadur Spray-Guard 35493
(is a solvent-free, two-component, epoxy coating. It cures to a hard, tough and well adhering protective coating. It can be spray applied in one coat at a minimum film thickness of 2.5 mm (100 mils))

Hempadur Multi-Strength 35530
(is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and to abrasion. Applicable in thick coats by standard heavy duty airless spray equipment. Harmless to grain cargo)

Hempadur 35560
(is a solvent-free, two-component, high-build, polyamine adduct cured epoxy paint, which cures to a coating with good resistance to fresh water)

Hempadur EM 35740
(is a two-component, ultra high solids and very low VOC epoxy coating. It has good self priming properties and is suited for application even under humid conditions and on marginally prepared surfaces. Treated areas, e.g. ballast tanks, can quickly be re-immersed and put back in service)

Hempadur Multi-Strength GF 35870
(An amine-adduct cured epoxy coating – the product is reinforced with Glassflakes. It is a hard, impact and abrasion resistant coating with good resistance to sea water, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products.Suitable for early water exposure and will continue to cure under water)

Hempadur 45141
(is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Harmless to grain cargoes)

Hempadur 45143
(is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Harmless to grain cargoes)

Hempadur Hi-Build 45200
(A two-component epoxy paint which forms a hard and tough coating resistant to seawater, mineral oils and splashes from petrol and related products. Complies to FDA 175.300 for transport of dry foodstuff)

Hempadur Multi-Strength 45751
(is a self-priming, two component, high build pure epoxy which cures to an abrasion and corrosion resistant coating. Applicable by standard heavy duty airless spray equipment)

Hempadur Multi-Strength 45753
(is a self-priming, two-component, high build pure epoxy which cures to an abrasion and corrosion resistant coating. Applicable by standard heavy duty airless spray equipment)

Hempadur Mastic 45880
(A two-component polyamide adduct cured, high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting properties and low temperature curing)

Hempadur Mastic 45881
(A two-component polyamide adduct cured, high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting properties and low temperature curing)

Hempadur 47080
(is a high-build, modified, two-component epoxy paint, which cures to a coating with good resistance to water, splashes of mineral oils, aliphatic hydrocarbons, and to abrasion and impact. Limited resistance to aromatic and stronger solvents and to acids and oxidizing materials)

Hempadur OBM 47150
(is a two-component, high build epoxy paint. It forms a hard and tough coating resistant to seawater, mineral oils and splashes from petrol and related products)

Hempadur 47182
(is an anticorrosive two-component, modified polyamide adduct cured epoxy)

Hempadur Ultra-Strength 47500
(A self-priming, two-component, high-build, pure epoxy-polyamine paint which cures to a very abrasion, impact and corrosion resistant coating. Applicable by standard heavy duty airless spray equipment)

Hempadur Ultra-Strength Fibre 47510
(Hempadur Ultra-Strength Fibre 47510 is a self-priming, two-component, high build, pure epoxy paint reinforced with patented Fibre technology. It is engineered to withstand the harsh conditions of cargo holds, thanks to its superior resistance to abrasion, impact, cracking and chemical attack. It can be applied at surface temperature as low as -5°C/22°F and its fast curing allows a very fast return to service after application)

Hempadur Easy 47700
(A durable and surface tolerant pure epoxy primer with a wide application window. High solids Hempadur EASY 47700 has been especially developed to make drydock maintenance easy: it dries fast and offers robust maintenance in cold and hot/humid climates. Also suitable for new builds, Hempadur 47700 dries fast from -10 °C, and is certified for grain, FDA and low flame spread, as well as being VOC compliant below the 250-grams/litre limit)

Hempadur Impact 47800
(A self-priming, two-component high build pure epoxy paint which cures to an abrasion, impact and corrosion resistant coating. Applicable by standard heavy duty airless spray equipment)

Hempadur 85671
(Hempadur 85671 is a two-component, amine adduct cured phenolic epoxy (novolac) coating with very good adhesion and high temperature, water and chemical resistance)

Hempalin

Hempalin Primer 12050
Hempalin Primer 12050 is a relatively quick-drying, zinc phosphate primer

Hempalin Primer Hi-Build 13200
Hempalin Primer Hi-Build 13200 is a quick-drying, urethane-modified alkyd primer.

Hempalin Undercoat 42460
Hempalin Undercoat 42460 is a fairly quick-drying alkyd pain

Hempalin Enamel 52140
Hempalin Enamel 52140 is a glossy alkyd enamel which forms a weather resistant coating. It is flexible and resistant to salt water and spillage of mineral oil and other aliphatic hydrocarbons

Hempalin Enamel Hi-Build 52220
Hempalin Enamel Hi-Build 52220 is an alkyd paint, which can be applied in high film thickness by airless spray

Hempalin Danrex 52360
Hempalin Danrex 52360 is a versatile, alkyd-based, economy paint with fairly good penetration into rough and porous substrate. Harmless to grain cargo.

Hempatex

Hempatex Hi-Build 46330
Hempatex Hi-Build 46330 is based on chlorinated rubber. Physically drying. Resistant to salt water, splashes of mineral oils, aliphatic solvents and a wide range of chemicals, but not to animal and vegetable oils or aromatic solvents

Hempatex Hi-Build 46410
A physically drying paint with good colourretention as a flat finish. Based on acrylic resin and non-chlorinated plasticizer. Contains zinc phosphate. Resistant to salt water, splashes of aliphatic hydrocarbons, animal and vegetable oils.

Hempatex Enamel 56360
Hempatex Enamel 56360 is a finishing coat based on acrylic resin and nonchlorinated plasticizer for optimum gloss and colour retention. Physically drying. Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils.

Hempathane

Hempathane Enamel 55100
Hempathane Enamel 55100 is a two-component, high-gloss acrylic polyurethane enamel, cured with aliphatic isocyanate, with good gloss and colour retention

Hempathane Topcoat 55210
A two-component, glossy acrylic polyurethane coating, cured with aliphatic isocyanate, with good gloss and colour retention

Hempathane HS 55610
Hempathane HS 55610 is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate

Hempasil

Hempasil Nexus 27310
Hempasil Nexus 27310 is a three-component silicone-based tie coat for Hempasil fouling release top coats, 77500 and 87500

Hempasil Nexus X-Tend 27500
Hempasil Nexus X-Tend 27500 is a high solid one component silicone based tiecoat for repair and touch-up areas of existing fouling release systems

Hempasil Nexus X-Seal 27600
Hempasil Nexus X-Seal 27600 is a flexible three component silicone based product.

Hempasil Helix 77000
Hempasil Helix 77000 is a biocide free, two-component, high solids fouling release coating based on silicone. Also, provides a smooth, low surface energy, hydrophobic surface with special surface release properties whereby fouling settlement is minimised. The coating may foul under static conditions (idle periods). This product does not contain organotin compounds acting as biocides and complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).

Hempasil 77100
Hempasil 77100 is a copper free, biocide free, two-component, silicone fouling release coating with a high solids content. The product is based on silicone and cures after addition of Hempasil Crosslinker 97080. It provides a smooth, low surface energy, hydrophobic surface with special surface release properties whereby fouling settlement is minimised. The surface properties facilitate self cleaning and provide easy clean characteristics.

Hempasil 77500
Hempasil 77500 is a biocide free, two-component, silicone fouling release coating with a high solids content. The product is based on silicone and cures after addition of Hempasil Crosslinker 97080. It provides a smooth, low surface energy, hydrophobic surface with special surface release properties whereby fouling settlement is minimised.

Hempasil X3+
Hempasil X3+ is a third generation fouling release coating with high solids content. This top of the line, biocide-free fouling release coating delivers optimal fuel savings and return on investment. An invisible hydrogel microlayer makes it hard for fouling organisms to attach to the hull and the product has excellent self-cleaning properties.

Hempaguard

Hempaguard X5 89700
An advanced fouling control coating with high solids content. The product is based on silicone, and cures after addition of Crosslinker 98980. It provides a smooth, low surface energy, repellent surface with unique fouling control properties. A hydrogel micro layer prevents fouling organisms firmly adhering while the silicone polymers facilitate self-cleaning. It therefore possesses a high fuel saving potential and is especially suitable for vessels operating with medium service intervals and/or long idle periods

Hempaguard X7 89900
An advanced fouling control coating with high solids content. The product is based on silicone, and cures after addition of Crosslinker 98980. It provides a smooth, low surface energy, repellent surface with unique fouling control properties. A hydro gel micro layer prevents fouling organisms firmly adhering while the silicone polymers facilitate self-cleaning. It therefore possesses a high fuel saving potential and is especially suitable for vessels operating with long service intervals and/or very long idle periods or in warm waters.

Hempel Antifouling
Globic NCT 8190M
Globic NCT 8190N
Globic NCT 8195N
Oceanic 8490K
Oceanic 8495K
Olympic 86900
Olympic FB 8695B
Basic 71950
Olympic+ 72950
Oceanic+ 73900
Oceanic+ 73902
Oceanic+ 73950
Oceanic+ 73952
Globic 6000 75950
Globic 8000
Globic 9000 78900
Globic 9000 78950
Globic 9500 M
Globic 9500 S 7895S
Dynamic 8000
Dynamic 9000 79900
Dynamic 9000 79950

Hempel Silicone
Hempel Silicone Topcoat 56900
Hempel Silicone Aluminium 56910
Hempel Silicone Aluminium 56914

Hempel Silvium
Hempel Silvium 51570

Hempel Galvosil
Hempel Galvosil 15700
Hempel Shop primer
Hempel Shopprimer ZS 15890
Hempel Shopprimer ZS 15820

Hemucryl
Hemucryl Enamel Hi-Build 58030

• Cat Protective

Hempadur
HEMPADUR SEALER 05990
Hempadur 15400
Hempadur 15553
Hempadur 15590
Hempadur 15600
HEMPADUR ZINC 17310
HEMPADUR ZINC 17340
Hempadur Zinc 17360
HEMPADUR AVANTGUARD 750
HEMPADUR PRO ZINC 17380
HEMPADUR FAST DRY 17410
Hempadur Quattro 17634
Hempadur Spray-Guard 35490
Hempadur Spray-Guard 35493
Hempadur 35560
HEMPADUR 35760
Hempadur Multi-strength 35840
Hempadur Multi-strength 35842
Hempadur Multi-Strength GF 35870
HEMPADUR MULTI-STRENGTH 45701
HEMPADUR MULTI-STRENGTH 45703
Hempadur Multi-Strength 45751
Hempadur Multi-Strength 45753
Hempadur Mastic 45880
Hempadur Mastic 45881
HEMPADUR 47140
HEMPADUR 47300
Hempadur Easy 47700
Hempadur 85671
Hempadur Avantguard 860
HEMPADUR 35900
Hempadur Mastic 4588W
HEMPADUR 4774D
HEMPADUR AVANTGUARD 550
HEMPADUR AVANTGUARD 770

Hempaprime
Hempaprime Multi 500 Summer
Hempaprime Multi 500 Winter

Hempalin
Hempalin Primer 12050
Hempalin Enamel52140
Hempaline Defend 740
Hempaline Defend 500
Hempaline Defend 560
Hempaline Defend 570

Hempel Silicone
Hempel Silicone Topcoat 56900
Hempel Silicone Aluminium 56914
HEMPEL SILICONE ACRYLIC 56940
VERSILINE CUI 56990

Hempel Galvosil
Hempel Galvosil 15700
HEMPEL Galvosil FIBRE 15750
Hempel Galvosil 15780
Hempel Galvosil 15790

Hemucryl
Hemucryl Primer Hi-Build 18032
Hemucryl Enamel Hi-Build 58030

Other Protective :
HEMPAXANE CLASSIC 55000
HEMPAREA DTM 55973
VERSILINE CUI 56990
HEMPEL HS GAS PIPE COATING 87830
HEMUTHANE ENAMEL 58510
HEMPACORE ONE 43600
HEMUDUR 18500
HEMPEL VINYL ESTER GF 35910
HEMPEL POLYESTER GF 35920
Hempathane HS 55610 5561B
Hempel Shopprimer ZS 15890

Berikut colour card produk Marine :

sumber : http://cathempel.com/

keywords :

Cat Marine Hempel
Cat Hempel
harga cat marine
jual cat marine
cat kapal hempel
harga cat hempel
hempel murah
hempel paling murah
produk hempel
jual cat hempadur
jual cat hempathane
jual cat hempatex
jual cat hempasil
cat tahan panas
Cat Marine Hempel
Cat Hempel
harga cat marine
jual cat marine
cat kapal hempel
harga cat hempel
hempel murah
hempel paling murah
produk hempel
jual cat hempadur
jual cat hempathane
jual cat hempatex
jual cat hempasil
cat tahan panas
warna cat marine